4.3 Charging: insert the USB interface of the charging cable into the USB ports of
the computer (or use the output: 5V = 2A power adapter) and connect the other
side of the USB interface to the battery socket. When charging, the USB drone's
red light will turn on and the green light will flash; when the battery is fully charged,
the red light will turn off and the green light will turn on, indicating that charging is
complete.
5. Names included with the remote control:
Fine tuning ( hold )
/ gear Power
indicator Left
joystick
Switch
(long
press)
Calibration
of
geomagnetism (compass)
( 3 s press)
Immediate take-off/landing
Hold down
both
buttons in
an
emergency
.
Familiarity with the
remote control
indicators:
Photo/video (long
press)
Right joystick
GPS control -
long press
Free mode
Immediate return
Common/GPS button: after adjusting the frequency, long press this button for
3 seconds to select the common mode and GPS mode (default GPS mode,
GPS light is on, if you select common mode, GPS light is off).
Free mode button: Press the button again to exit the free mode, the light goes off.
Return button: press the button once to return and the return light will
illuminate. Press the button again to cancel the return, the light goes off.
4.1 Press the drone battery lock
4.2 Remove the
battery
