HoloSea S7
2
INTRODUCTION
Figure 7: Sample space
2.5.4
Crown
The Crown is the metal framing around the connector on the HoloSea. Its main purpose is for
handling and deployment.
2.5.5
Purge Valves
There are two purge valves on the bottom of the microscope, as shown in the right panel of Figure
8.
Figure 8: The two purge valves on the bottom of the microscope.
The purge valves do not need to be used to ensure the microscope operates correctly. If a 4Deep
representative deems it necessary for the purge valves to be opened, it will be completed at the
4Deep office,
NOT BY THE USER.
Note that using the purge valves is only necessary to solve
one issue that MAY occur with the microscope, so it is likely the purging will not need to occur.
DO NOT USE THE PURGE VALVES
. Using the purge valve without the advice of 4Deep
WILL NEGATE ANY WARRANTY
on the microscope.
9
