Installation Manual
| VISIX PTZ Network Camera
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
26
Figure 2-‐24
Install the bolts
Wiring For Ceiling Mounting Applications
The cables of dome can be routed either from the top or the side of the back box, as shown in Figure 2-‐25. For the
cables routed from the top of the back box, it is required to drill a cable hole in the ceiling.
Figure 2-‐25
Cabling for Ceiling Mounting
Ceiling Mounting
Steps:
1)
Rotate the lower dome counterclockwise to separate it from the back box. Refer to the Figure 2-‐17.
2)
Remove the protective lens cover, foam and sticker from the dome drive.
3)
Attach lower dome to the back box, and rotate clockwise to secure it.
4)
Use the mounting base as a template to mark four screw holes onto the ceiling.
5)
If you route cables from the top of the back box, mark the cable hole on the ceiling and drill a hole.