manualshive.com logo in svg

3xLogic Vigil Server V5.00, User Manual, Page: 77 / 134

Share
Download
3xLogic Vigil Server V5.00 User Manual Download Page 77

Delete 

Prompts to remove the selected email address from the recipients list. 

 

 Note:

 For email to function properly, a valid SMTP  Server  must  be  configured  in  the  “DVR 

Settings” tab.

 

 

Live Overlay Tab 

2.1.10

For live overlay DVR systems, live overlay camera settings are available.  These settings modify the 
appearance of the live overlay image. 

 

 

 

Live Overlay 

Brightness 

Increases/decreases the brightness of the image recorded. 

Contrast 

Increases/decreases the contrast of the image recorded. 

Saturation U / V 

Use the Saturation U and Saturation V slide bars to adjust the U and V colour 

difference signals used in YUV colour format. 

Reset to Default 

Resets live overlay values to default. 

 

People Counting Tab 

2.1.11

A motion detection feature allows entities crossing a threshold to be counted. 
 

 

 

People Counting 

Enable 

Enables people counting.  Click “Settings…” to configure people counting settings for 
the selected camera. 

 

3xLogic Vigil System Server Software - User’s Guide    Doc# 08100610 Page 

77 

 

Summary of Contents for Vigil Server V5.00







































































































































Reviews:

No comments