Chapter 2. CLI Syntax Reference
92
3ware Serial ATA RAID Controller CLI Guide
//localhost> help /cx
/cx show
/cx show
attribute
[
attribute
...] where attribute is:
achip|allunitstatus|autocarve|autorebuild (9550SX,
9590SE, 9650SE only)|bios|carvesize(9000 series)|
ctlbus (9550SX, 9590SE, 9650SE)|driver|drivestatus|
exportjbod|firmware|memory|model|monitor|numdrives|
numports|numunits|pcb|pchip|serial|spinup|stagger|
unitstatus|ondegrade(9000S only)
/cx show all where all means attributes and configurations.
/cx show diag
/cx show alarms [reverse]
/cx show rebuild (9000 only)
/cx show verify (9000 only)
/cx show selftest (9000 only)
/cx add type=<
RaidType
> disk=<
p:-p..
> [stripe=<
Stripe
>]
[noscan] [nocache][group=<3|4|5|6|7|8
|9|10|11|12>]
[autoverify][ignoreECC] [name=string (9000 only)]
[storsave=<protect|balance|perform[quiet]>(9550SX,
9590SE, 9650SE)] RaidType={raid0, raid1, raid5, raid6
(9650SE), raid10, raid50, single, spare, JBOD(7000/8000
only)}
/cx add rebuild=
ddd:hh:duration
(9000 only)
/cx add verify=
ddd:hh:duration
(9000 only)
/cx add selftest=
ddd:hh
(9000 only)
/cx del rebuild=
slot_id
(9000 only)
/cx del verify=
slot_id
(9000 only)
/cx del selftest=
slot_id
(9000 only)
/cx set exportjbod=on|off (9000 only)
/cx set ondegrade=cacheoff|follow (9500S only)
/cx set spinup=
nn
(9000 only)
/cx set stagger=
nn
(9000 only)
/cx set autocarve=on|off (9000 only)
/cx set rebuild=enable|disable|<1..5>
(enable|disable for 9000 only)
/cx set verify=enable|disable|<1..5>
(enable|disable for 9000 only)
/cx set selftest=enable|disable [task=UDMA|SMART](9000 only)
/cx set autorebuild=on|off (9550SX, 9590SE, and 9650SE only)
/cx update fw=
filename_with_path
[force] (9000 only)
/cx flush
/cx commit (Windows only) (Also known as shutdown)
/cx start mediascan (7000/8000 only)
/cx stop mediascan (7000/8000 only)
/cx rescan [noscan] NOTE: Does not import non-JBOD on 7/8000
models.
//localhost>
