Chapter 2. CLI Syntax Reference
88
3ware Serial ATA RAID Controller CLI Guide
Typical output looks like:
//localhost> /e0 show
Encl Controllers
-------------------------
e0 /c0
Fan Status
----------------------
fan0 OK
TempSensor Temperature
-------------------------------
temp0 24~C(75~F)
Slot Status Port Identify
----------------------------------------------------
slot0 OK /c0/p0 No
slot1 OK /c0/p1 Yes
slot2 NO-DEVICE - No
slot3 NO-DEVICE - No
/e
x
show
attribute
[
attribute
...]
This command shows the current setting of the given attribute(s). One or
many attributes can be requested. An invalid attribute will terminate the loop.
Possible attributes are: controllers, protocol, slots, fans, and temp.
/e
x
show controllers
This command lists the controller associated with enclosure
/ex
.
Example:
//localhost> /e0 show controllers
/e0 Connected to /c0 controller.
