I
Safety Information
Do not use this product if the ambient temperature outside the vehicle exceeds 80°C.As
this product may generate heat, keep flammable and explosive materials away from this
product. In order to avoid fire due to overloading of the power cable, please follow the
instructions for use of this product or the Make sure that the installed cable is properly
loaded and do not replace the power cord at will.
Before using the apparatus, please must read, understand and comply with all the
safety information, warning and etc.
Warning:
Only qualified mechanics are allowed to install the apparatus according to the hereby
product manual. Do not connect the apparatus to alternating current. Input current is
DC8~DC18. The positive and negative poles of the main power line must be connected
to the positive and negative poles of the car battery, and the control line must be
connected to the ACC position of the fuse box or the ignition switch (professionals can
also modify other methods). After installation, make sure wire connection is right and
fasten the wire connection. Do not step on power or data cables, and especially avoid
pinching plugs, power sockets, and power/data cable. Damaged power and data cables
should be replaced immediately. Only use accessories and accessories specified by
our company. If the product is not stored for a long time, please keep the product in a
dry environment and test it with electricity every 3 months. Please train the driver on the
basic working principle of the product, so as to know the basic problem point when there
is an abnormality.This product should be installed and serviced by qualified service
technicians.When this product is damaged in any events (such as a damaged power
cord or plug, the device does not work properly, or the device has been dropped),
please contact a professional mechanics to fix. This product may only be used in
conjunction with systems or peripherals specified by the manufacturer or included with
the device. Be careful when lifting, moving or transporting this product to avoid product
tip-over damage and personal injury.
This product may cause injury due to short circuit, smoke and falling due to improper
operation. When installing this product or wiring, please make sure that the vehicle is
turned off to avoid damage to the vehicle. Please do not connect the input power
terminal of this product to AC power. Please carefully check the power cord, power cord
connectors, and wiring terminals for any problems before powering on the product.Do
not use any damaged or exposed power cord or power plug. To reduce product
abnormalities, do not disassemble the product.
/ /
01
