3TEMP Hipster WALL, User Manual

Page: 8 / 40

8
Rev.300305-02
Hipster WALL
Avoid getting the coffee machine wet and do not spray liquids onto it. In the event of contact
with liquid immediately switch off the power at the socket or main breaker and dry the
appliance thoroughly.
Never immerse the machine, plug or mains cable in water because there is a danger of
electric shock.
Never try to put out a fire or flames with water. Turn of the appliance and remove the plug
from the socket, and smother the flames with a fire blanket or other appropriate cover.
Do not operate any electrical appliance with a damaged cord or after the appliance has been
damaged in any manner. If the mains cable is damaged it must be replaced by the customer
service to avoid a hazard. Only use the attached power cord.
Do not install the machine in environments in which the temperature is 0° C or less.
Do not move the Hipster brewer whilst in operation.
Do not use the Hipster brewer on a sink drain board.
Do not place the Hipster brewer on or near a hot gas or electric burner, or where it could
touch a heated oven.
Keep the appliance and accessories clean. Follow the cleaning instructions provided in this
manual.
Only use original spare parts. The use of spare parts not approved by the
manufacturer could lead to fires, electric shocks or personal injury.
Do not place on top of any other appliance.
Appliance must not be cleaned by a water jet.
Electric shock hazard!
This appliance dispense hot water from the brewing hat and may cause injury if not
used correctly. The brew basket must be in place before a recipe is started.
Do not move the brew basket while the coffee is being brewed.
Do not touch hot surfaces with your hands; use the handles and buttons.
Burn hazard!