N1072
Box Network Camera
2 Meg H.264
- 59 -
PTZ
PTZ Camera Port Setting
Camera Driver: N1072 supports the PTZ control of those analog PTZ cameras use the
drivers of Pelco-D, Pelco-P. Refer to the user manual of your PTZ
cameras, and you will know which driver to select. Moreover, select
the serial number (address) of the targeted PTZ camera for controlled
setting. If the selection is none, please upload the PTZ driver first.
PTZ Driver Manager
In the Camera Driver column, list all the drivers that are installed in the video server.
Select
Delete
to eliminate any selected driver.
PTZ Driver Upload
Upload the PTZ drivers from
www.3Svision.com
for more camera drivers which are
supported.
Serial Port Setting
Port:
COM0
Port Mode:
RS485
Baud rate:
Select the measure of the symbol rate from 2400, 4800 and 9600.
Data bits:
Select the number of bits used to represent one character of data from
7 and 8.
Stop bits:
Select the b
it used in asynchronous communications to indicate the
end of a piece of data from 1 and 2.
Parity:
Select the parity from None, Even and Odd.
