10
4. Use the DOWN (9) button to highlight the setting named
“G-Sensor” and push OK (5).
5. Using the UP(7) and DOWN (9) button, highlight the
required sensitivity of the G-Sensor (2G is the most sensitive
setting only requiring small bumps to log footage as Locked,
and 8G is the least sensitive requiring a larger amount of
activity to log footage as Locked).
6. To confirm selection push the OK (5) button, the camera will
take you back to the VIDEO menu.
Set Park Mode
Park Mode will monitor for activity using the G-Sensor after the car
is parked, even if your ignition is turned off. If activity is detected, the
camera will record 10 seconds of footage.
To set park mode on your camera follow the directions below:
1. Ensure you are not currently recording. If the red record
indicator is flashing at the top left of the camera’s screen,
push the OK (5) button to stop recording.
2. Push the Menu (7) Button twice, taking you to the SETUP
menu.
3. Using the DOWN (9) button highlight the setting named
“Park Mode” and push OK (5).
4. Using the UP (7) and DOWN (9) button, highlight the
required sensitivity of the GSensor (2G is the most sensitive
setting only requiring small bumps to trigger recording, and
8G is the least sensitive requiring a larger amount of activity
to trigger recording).
5. To confirm selection push the OK (5) button, the camera will
take you back to the SETUP menu.
