manualshive.com logo in svg

3scort Escort i-5, User Manual, Page: 7 / 53

Share
Download
3scort Escort i-5 User Manual Download Page 7

ESCORT. Digital indicator Escort i-5.

User Manual 2022.08-05. Page

7

of

53

2

HOW TO USE

2.1 Use guidelines

2.1.1 The Indicator Escort i-5 must be operated in accordance with the following documents:

−

Digital indicator Escort i-5 User Manual ТEМГ.468389.001 РЭ

−

Digital indicator Escort i-5 Datasheet ТEМГ.468389.001 ПС

2.1.2 The company or an individual that has purchased the Digital indicator Escort i-5 must

ensure that the device is stored, installed and operated in accordance with the requirements stated in

the Datasheet and User Manual of the Device.

2.1.3 The Device must be installed and operated only by the authorized staff who have read the

Datasheet and User Manual.

2.1.4

After transporting the Device at negative temperatures exceeding the operating

temperature range and before unpacking the Device, it needs to stay inactive in an environment with

normal operating temperatures (20 ± 10 °C) for no less than 4 hours. After unpacking the Device, it is

required to check the presence of all items of the installation kit in the package as well as to examine

the Devices for any signs of damage.

2.1.5 DO NOT USE THE DEVICE UNDER THE OPERATING CONDITIONS

DIFFERENT FROM THE STATED IN THE DATASHEET OF THE DEVICE AND IN THE

ART 1.2 OF THE USER MANUAL!

2.1.6 AVOID ANY DAMAGE TO THE DIGITAL INDICATOR ESCORT i-5, ITS

PARTS OR WIRES DURING THE INSTALLATION AND OPERATION!

2.1.7 The Indicator i-5 is not subject to any repairs by a customer and must be sent to the

manufacturer for repairs or replacement in case of a malfunction.

2.1.8 The most common way to mount the Indicator i-5 is by means of self-tapping screws.

To mount the i-5 onto a surface, drill 4 orifices as shown on the Figure 4 at a spot, where it will

be possible to connect the wires of the i-5 to an external device or devices and a power supply and

where the readings displayed by the Indicator will be clearly visible.

Mount and fix the holder with the self-tapping screws. Place the Escort i-5 into the holder.

Figure 3 demonstrates an example of the suggested installation. Figure 4 provides the fitting

dimensions.

Summary of Contents for Escort i-5






















































Reviews:

No comments