ESCORT. Digital indicator Escort i-5.
User Manual 2022.08-05. Page
26
of
53
2.6.3 Then select the ‘
Wired
’ option, enter the network address (the value can be from 1 to
255) and press ‘Connect’ (Fig. 36). If the i-5 is not configured to operate in the RS-485 Active mode
or if there is no GPS tracker/gateway or other device that could request the data from the sensor so that
the i-5 could listen to the sensor’s response and show its reading, the level of the wired sensor will be
displayed as 0 (Fig. 37).
2.6.4 The network address of the sensor can be configured in the Escort configurator for PC or
in the app (Fig. 38 and Fig. 39).
2.6.5 If you need to connect several wired sensors, repeat the procedure described above.
Attention!
Every sensor connected via the RS-485 interface must have different network
addresses.
Fig. 36 Connecting wired sensors (
2
)
Fig. 37 Sensor list
Summary of Contents for Escort i-5
Page 1: ......