5
Reverb Control (6)
The REVERB control is used to add/blend in the perfect amount of ambience to your sound. The
reverb effect in this amplifier features pure Class A vacuum tube drive and recovery circuitry to
deliver an authentic, vintage sounding spring reverb effect.
Reverb Assign Switch (7)
The Reverb Assign switch allows you to assign the tube/spring reverb effect to both channels (up
position) or clean channel only. (down position).
Front Panel: Reverb Level and Assignment
6
7
Input Jack (8)
The INPUT jack is where you connect instrument level signals.
Channel Selector Switch (9)
The middle position selects the Clean channel. The left position selects the Dirty channel. The right
position places the amplifier in Foot Switch mode and allows remote channel changing.
The
Channel Indicator Light (10)
will glow a bright red color indicating that you are on the Dirty
channel.
Front Panel: Input and Channel Selection
8
10
9