11
Line or Slave Out Level Control (26)
Controls the signal level of the line or slave output. Start at zero and adjust clock-wise to optimize
your signal level feeding the next piece of audio equipment in your signal chain. The audio signal
for the Line/Slave Output originates from the output transformer of your amplifier. When you adjust
your amp’s volume, you may need to readjust your Line/Slave Out level too.
Line or Slave Output Jack (27)
The audio signal for the Line/Slave Output originates from the output transformer of your amplifier
capturing the full detail of every tone crafting decision you’ve made within the amplifier. However,
the output transformer can transmit audio signals that go far beyond what is useable for pleasing
guitar tone. Fortunately, most guitar speakers roll off the harsh higher frequencies that exist beyond
5 - 8 kHz.
The Kitchen Sink 6VEL features a pleasing circuit that replicates the type of high frequency roll off
you’d expect from a high quality mic’d speaker cabinet. It’s not invasive, it’s voiced ‘just right’ leaving
your downstream audio devices, such as digital multi-effects and power amplifiers, to only receive
useable signal and not the ‘ratty/fizzy’ signal that typically emanates from output transformer
sourced outputs.
Back Panel: Line/Slave Output
27
26