PS1005G-1GT-4PoE User Manual
6
3.2 Connect Computer (NIC) to the Switch
Please insert the NIC into the computer, after installing network card driver, please
connect one end of the twisted pair to RJ-45 jack of your computer, the other end will be
connected to any RJ-45 port of the Switch, the maximum distance between Switch and
computer is around 100 meters. Once the connection is OK and the devices are power on
normally, the Link/Act/Speed status indicator lights corresponding ports of the Switch.
3.3 Switch connection to the PD
2~5 ports of the Switch have PoE power supply function, the maximum output power
up to 30W each port, it can make PD devices, such as internet phone, network camera,
wireless access point device. You only need to connect the Switch PoE port to the PD port
by network cable directly.
