3onedata NP301, User Manual, Page: 20 / 24

Shenzhen
3onedata Technology Co., Ltd
17
"OK" button.
（
Figure 5.10
）
Choose connecting serial port. Choose connecting serial port under”Connect using”
（
pay attention to the
chosen serial port is consistent with the port connected with the configuration cable ）， Click “OK” 。 As figure
5.11 。
（ Figure 5.11 ）
Set serial port parameters. As shown in Figure 5.12, set the “Bits per second” in the”Properties” of serial
port is 115200bit/s ， ”Data bits” is 8 ， ”parity” is None ， ”Stop Bits” is 1 ， ”Flow Control” is None. Click “OK”
button to enter to “Hyper Terminal” Window.