LED
Indicate Description
PWR
ON
The power supply
connection is running
normally and the device
is in local mode.
Blinking
The power supply
connection is running
normally and the device
is in remote mode.
OFF
PWR is disconnected and
running abnormally
LFP
ON
Fiber port/copper port is
not connected or
connected abnormally.
OFF
Fiber port/copper port is
connected normally.
LINK
(1-3/G1-G3/GS)
ON
Interface has established
valid network connection
Blinking
Interface is in network
active status
OFF
Interface hasn’t
established valid network
connection
【
Specification
】
Panel
100M copper port
100/100Base-T(X) self-adaption
100M fiber port
100Base-FX fiber port
Gigabit copper port
10/100/1000Base-T(X)
self-adaption
Gigabit fiber port
1000Base-X, 1×9 fiber port
Gigabit SFP Slot
1000Base- X, SFP slot
Indicator
Power supply indicator, LFP
indicator, interface connection
indicator
Switch Property
Model I, Model II
MAC address: 2K
Packet buffer size: 0.75M
Backplane bandwidth: 0.8G
Model III, Model IV
Model V, Model VI
MAC address: 8K
Packet buffer size: 1M
Backplane bandwidth: 14G
Power Supply
Input power supply
DC power supply
12~48VDC
AC power supply 220VAC
DC support nonpolarity
Access terminal block
3-pin 7.62mm pitch terminal
blocks
Power Consumption
No-load
≤1.47W@24VDC
Full-load
≤1.95W@24VDC
Working Environment
Working temperature
-40~75
℃
Storage temperature
-40~85
℃
Working humidity
5%
～
95% (no condensation)
Protection grade
IP40 (corrugated high-strength
metal
）
