manualshive.com logo in svg

3onedata IES7110 3GS Series, User Manual, Page: 14 / 57

Share
Download
3onedata IES7110 3GS Series User Manual Download Page 14

User manual

CHAPTER 5 NETWORK CONFIGURATION

IES7110-3GS series can access, configuration and management through WEB, the user manual will

introduce the operations step by step.

5.1 Configure PC’s IP Address

IES7110-3GS series default address is: 192.168.1.254, subnet mask is: 255.255.255.0. When entering

into IES7110-3GS series Web interface through internet explorer, the IP address of IES7110-3GS series and PC
must be in the same Local Area Network.

You can modify PC's or IES7110-3GS series's IP address to make sure that they are in the same Local

Area Network. Operating process can follow method 1 or method 2 as below,

Method 1: Modify PC's IP address

Click Start->Control panel->network connections->Local area Connection->Properties->Internet protocol

（

TCP/IP

）

Setting PC’s IP address: 192.168.1.X (X is less than 254, from 2 to 253).

Click “OK”, IP address modifies successfully

Method 2: Modify IES7110-3GS series's IP address through Blue_eyes manager software.

Install Blue_eyes manager software on the PC.

Enter into Blue_eyes management interface, click "Search" to search the device.

After searching the device, move mouse to the device, click right key, modify the device's IP address,
Please make sure the device and PC in the same Local Area Network.

This configuration example does not use the Advanced button in the last picture. In one and the same network card allows the
use of multiple IP pseudo-address when use the advanced configuration of the IP address, at which does not change the
original address can still access the switch device. But in the IGMP polling and IEEE 802.1x polling windows system can not
handle correctly, Unix-like system does not have this problem. The advanced users have to pay attention to this issue.

Summary of Contents for IES7110 3GS Series


























































Reviews:

No comments