1. Grounding screw
2. Relay output (2 bits)
3. Power input
4. Console port (RS-232 serial
Port, RJ45)
5. Reset
6. DIN-Rail kit
7. Company logo and product name
8. Port indicator
9. System indicator
10. Alarm indicator
11. Power indicator
12. 100Base-FX port
13. 10Base-T /100Base-TX port
【
Dimension
】
Unit (mm)
【
Power Input
】
Top view
Front view
IES3016L series switch provides 4 bits terminal blocks
(V1-, V1+, V2-, and V2+).
Notice: 1. power on: please connect the power line to the
switch before you plug in the power plug.
2. Power off: please unplug the switch then
remove the power line from the terminal.
【
Console Port
】
IES3016L series switch provides 1 console port (based on
serial port).the console port is RJ45 connector in top panel. It is
used to connect the PC for program updating by using a
connecting cable along with the switch.
【
Relay Contact
】
The input terminal block of relay is in top panel of the switch.
It is the contact of alarm relay. It will be open circuit when alarm
happens, or it will be always closed circuit. IES3016L series
switch supports 1 alarm output to connect alarm indicator or
alarm buzzer to remind of operator in time in case of something
happened
.
【
Communication Port
】
10/100BaseT(X) Ethernet port
10/100BaseT(X) Ethernet port is in front panel of the device.
The connector type is RJ45 and its pin definition is shown
below. The pinout of RJ45 port display as below, connect by
UTP or STP. The connect distance is no more than 100m.
100Mbps is used 100
Ω
of UTP 5 , 10Mbps is used 100
Ω
of UTP
3,4,5.
RJ 45 port supports automatic MDI/MDI-X operation. It
can connect the PC, Server, Converter and HUB. Corresponding
connection of Pin 1,2,3,6 in MDI: 1
→
1, 2
→
2, 3
→
3, 6
→
6;
corresponding connection of pin 1,2,3,6 in MDI-X: 1
→
3, 2
→
6,
3
→
1, 6
→
2. the definition of Pin in the table as below.
PIN
MDI
MDI-X
1
TX+
RX+
2
TX-
RX-
3
RX+
TX+
6
RX-
TX-
4, 5, 7, 8
—
—
Note
：
“TX±”transmit data ±
，
“RX±”receive data ±
，
“—” no use
。
MDI (straight-through cable)
1
8
