LED
Indicate Description
opposite end is strong
ALM
ON
Restore factory settings alarm
OFF
No restore factory settings alarm
P1/P2
ON
PWR is connected and running
normally
OFF
PWR is disconnected and
running abnormally
WAN/LAN
ON
Copper port has established an
active network connection.
Blinking
Copper port is in a network
activity state.
OFF
Copper port has not established
an active network connection.
POE
ON
POE ports receive power supply
normally
OFF
POE is disabled or disconnected
【
Logging in to WEB Interface
】
This device supports WEB management and configuration.
Computer can access the device via LAN. The way of logging
in to device’s configuration interface via IE browser is shown
as below:
Step 1
Configure the IP addresses of computer and the
device to the same network segment, and the
network between them can be mutually accessed
Step 2
Enter device’s IP address in the address bar of the
computer browser.
Step 3
Enter device’s user name and password in the
login window as shown below.
Step 4
Click “Login” button to login to the WEB interface of
the device.
Note:
The default IP address of the device is “192.168.1.254”.
The default user name and password of the device is
“admin”.
If the username or password is lost, user can restore it to
factory settings via device DIP switch or management
software; all modified configurations will be cleared
after restoring to factory settings, so please backup
configuration file in advance.
Please refer to user manual for specific configuration
method of logging in to WEB interface and other
configurations about network management function.
【
Specification
】
Standard
Standard
IEEE802.3, IEEE802.3u,
IEEE802.3ab, IEEE802.11a/b/g/n,
IEEE802.11i, IEEE802.11r,
IEEE802.11ac
Panel
Copper port
1 10/100/1000Base-T(X) LAN
port, RJ45 port
1 10/100/1000Base-T(X) WAN
port,RJ45 port, supports PoE
48VDC power supply input
Antenna interface
2 2.4G WIFI antenna
interfaces, RP-SMA-K type
(Female)
2 5G WIFI antenna interfaces,
RP-SMA-K type (Female)
Indicator
2.4G WLAN indicator, 5G WLAN
indicator, running indicator, power
supply indicator, alarm indicator,
WAN port connection indicator, LAN
port connection indicator, WLAN
bridging quality indicator, PoE
indicator
WIFI Transmission
Rate
802.11n
6.5~300Mbps
802.11b
11/5.5/2/1Mbps
802.11g/a
54/48/36/24/18/12/9/6Mbps
802.11ac
65Mbps~867Mbps
WIFI RF
2.4G channel
2.401GHz~2.483GHz
5G channel
5.170GHz~5.330GHz,
5.490GHz~5.650GHz,
5.735GHz~5.835GHz
RF power output
23dBm
Modulation scheme DBPSK, DQPSK, CCK, OFDM,
16-QAM, 64-QAM
WIFI Receiving
Sensitivity
802.11n_HT40
-82dBm@MCS0, -64dBm@MCS7
802.11n_HT20
-85dBm@MCS0, -67dBm@MCS7
802.11g/a
-91dBm@6Mbps,
-72dBm@54Mbps
802.11b
-93dBm@1Mbps,
-87dBm@11Mbps
802.11ac
-84dBm@MCS0, -59dBm@MCS9
WIFI Transmission
Power
802.11n_HT40
23dBm@MCS0, 20dBm@MCS7
802.11n_HT20
23dBm@MCS0, 20dBm@MCS7
802.11g/a
23dBm@6Mbps, 20dBm@54Mbps
