3nStar RPT008, Programmer'S Manual

Page: 19 / 44

Programmer Manual
ESC a n
[Name] Select justification
[Format] ASCII ESC a n
Hex 1B 61 n
Decimal 27 97 n
[Range] 0
≤
n
≤
2, 48
≤
n
≤
50
[Description] Aligns all the data in one line to the specified position n selects the justification as follows:
[Details] • The command is enabled only when processed at the beginning of the line in standard mode.
• If this command is input in page mode, the printer performs only internal flag operations.
• This command has no effect in page mode.
• This command executes justification in the printing area.
• This command justifies the space area according to HT, ESC $ or ESC \.
[Default] n = 0
[Example]
n
0,48
1,49
2,50
Justification
Left justification
Centering
Right justification
Left justification
ABC
ABCD
ABCDE
Centering
ABC
ABCD
ABCDE
ABC
ABCD
ABCDE
Right justification
ESC c 3 n (*)
[Name] Select paper sensor(s) to output paper end signals
[Format] ASCII ESC c 3 n
Hex 1B 63 33 n
Decimal 27 99 51 n
[Range] 0
≤
n
≤
255
[Description] • Selects the paper sensor(s) to output paper end signals
• Each bit of n is used as follows:
[
Details] • It is possible to select multiple sensors to output signals. Then, if any of the sensors detects a paper end, the paper
end signal is output.
• The command is available only with a parallel interface and is ignored with a serial interface.
• Sensor is switched when executing this command. The paper end signal switching be delayed depending on the
receive buffer state.
• If either bit 0 or bit 1 is on, the paper roll near-end sensor is selected as the paper sensor outputting paper-end signals.
• If either bit 2 or bit 3 is on, the paper roll end sensor is selected as the paper sensor outputting paper-end signals.
• When all the sensors are disabled, the paper end signal always outputs a paper present status.
[Default] n = 15
Bit
0
1
2
3
4 - 7
Off/On
Off
Off
On
On
Off
On
Off
On
Hex
00
00
01
02
- -
00
04
08
00
Decimal
0
1
-
0
0
4
0
8
Function
Paper roll near-end sensor disabled
Paper roll near-end sensor enabled
Paper roll end sensor disabled
Paper roll near-end sensor enabled
Paper roll end sensor disabled
Paper roll near-end sensor enabled
Paper roll end sensor disabled
Paper roll near-end sensor enabled
Undefined
2