3nStar Inc.
PPT205 User Manual
5 |
P a g e
Self-test
Turn off the printer. Press and hold the FEED button and then press the POWER button. Wait 3
seconds and then release both buttons at the same time. The printer will print its status and
settings
Enter hexadecimal mode:
Turn off the printer. Press and hold the FEED button and then press the POWER button. Wait
10 seconds and then release both buttons. The printer will print "Hexadecimal Dump" first,
then it will enter in HEX printing mode.
Initialization configuration
Turn off the printer. Press and hold the FEED button and then press the POWER button. Wait 2
seconds, release the POWER
button, 25 seconds after the printer’s green indicator will flash
and the buzzer will ring. Release the FEED button.
At this point, initialization is complete. Press the POWER Button again to start using the printer.
Caution:
1.
The printer will only work with the designated battery & power adapter. Using a non-
original battery or adapter may cause damage to the printer.
2.
If the printer will not be used for a long period of time, the battery must be taken out of
the printer or it may cause battery leakage.
3.
The battery fluid used in the printer battery is caustic. If the battery accidentally leaks
and the fluid makes contact with skin or clothes, please flush with running water
immediately. If the fluid gets into eyes, please seek immediate medical care.
4.
The printer must not be put into water or exposed to rain or it will damage the printer.
5.
Although the printer can work in environment temperature between 0°C to 40C, it may
affect printing quality if environment temperature is too low or too high.
