3nh TS Series, Operation Manual

Page: 9 / 55

Figure 5 White Calibration
2.3 Measurement Instruction
As shown in Figures 6, 7, and 8, it is working condition area at the top of measurement interface, displaying the
status of measurement mode (SCI/SCE), Bluetooth and UV conditions. Under the measurement interface is a
shortcut display area. You can click the corresponding shortcut key to quickly switch the test data. The middle part
of the measurement interface is the data display area. The instrument displays the corresponding chromaticity
data according to the current user settings. The bottom of the measurement interface is the key operation area.
You can operate the current data by clicking the corresponding operation button. Figures 7 and 8 respectively
show the spectral area and the color index area and quickly switch by clicking the down button
.