NS810 SPECTROPHOTOMETER OPERATING MANUAL
4
cause irreversible damage.
3.
Please remove the battery if you don‟t use it for a long time.
4.
When charging the battery, please connect power adapter or USB cable (to PC).
Meanwhile, push the switch to “1” to turn it on, and then the battery will be
charging. If not charge the battery, you can remove the battery and connect power
adapter, the instrument still works normally.
5.
When charging, dynamic battery icon will display on the top right corner of
measurement interface.
3. Battery Installation
1.
When installing battery, be sure the power is cut off. (Push the switch to “0”). Then
remove the battery cover.
2.
Insert the Li-ion battery into battery compartment and push it gently. Please pay
attention to the battery contacts.
3.
Put the battery cover on Li-ion battery, and then push it up as shown in Figure 2.
Summary of Contents for NS810
Page 1: ...Espectrofot metro NS810 Geometr a de visualizaci n D 8 Apertura de medici n 8 mm 3NH 3N NS810...
Page 39: ...NS810 SPECTROPHOTOMETER OPERATING MANUAL 37 Figure 43 Time Date Setting Figure 44 Set Time...
Page 40: ...NS810 SPECTROPHOTOMETER OPERATING MANUAL 38 Figure 45 Set Date Figure 46 Time Format...
Page 46: ......
