3MINDWAVE VR AGENT-TWIN, User Manual

Page: 27 / 102

Page 27
Step 5: Connection of the fixing seat for gun beam and the main frame
1. Remove 4 Cross combination screws(M4*20) for supporting iron of the fixing seat and remove them
for later use.
2. Remove 8 Socket head cap screws(M4*20) on two rear covers of lightbox and remove them for later
use.
3. Remove 2 Socket head cap screws(M4*12) on the fixing plate and sealing plate for beam and
remove them for later use.
4. Use twelve M8*50 outer hexagon screws (with spring washers and flat washers) to lock the two
fixing seats for gun beam on the main frame respectively (this operation shall be caried out by at
least two persons, and two herringbone ladders are required).
5. Use six M4*16 (black-plated) cross large flat head screw to fix the left and right upper bracket
components to the fixing seat of gun beam respectively and connect the wire (herringbone ladder is
required for this operation).
6. Use four M8*40 hex screws to fix the two beam fixing plates on the main frame respectively
(herringbone ladder is required for this operation).
7. Use 16 Socket head cap screws(M4*20) to fix four rear covers of light boxes on the fixing seat for
gun beam respectively.