3M™ Digital Projector X95i Product Warranty and Safety Guide
14
ENGLISH
© 3M 2009. All rights reserved.
¥
Note
Reset the lamp operation hours. See “Reset Lamp Hours” for details.
3.
Remove lamp module:
Slowly pick up the lamp module by the handles. (4)
4.
Insert lamp module :
,QVHUWWKHQHZODPSDQGUHWLJKWHQ¿UPO\WKHVFUHZV
(3) of the lamp
that are loosened in the previous process to lock it in place.
Optional Lamp: 78-6969-9998-2
(DT00873)
(Contact 3M Customer Service.)
Slide the lamp
door (2)
EDFNLQSODFHDQG¿UPO\IDVWHQWKHVFUHZRIWKHODPS
door
.
¥
Note
For maximum lamp life, do not strike or drop, improperly handle, or scratch the lamp glass.
Also, do not install an old or previously used lamp.
1.
Remove lamp access door:
Loosen the screw (marked by arrow) (1) of the lamp door and then
slide the lamp door (2) to the side to remove it
2.
Retaining screws
:
Loosen the 3 screws (marked by arrow) (3) of the lamp.
¥
Note
All lamp module screws must be loosened. These screws are self-containing screws that
cannot be removed from the lamp module or access door.
(2) Lamp access door
(1) Screw
(4) Handle
(3) Screws
Summary of Contents for X95I - Digital Projector XGA LCD
Page 19: ......