4
To reduce the risks associated with hazardous voltage and fire:
• Do not use the power supply if damaged. Replace power supply if damaged using only 3M supplied parts.
• Do not attempt to service the power supply or monitor, there are no user serviceable parts; return to
3M for service.
• Do not position the monitor or other equipment where unplugging the power supply is difficult. Always
locate the power socket or outlet near the equipment. The power supply plug serves as the disconnect
device.
• Do not use the 3M
™
WS Aware Workstation Monitor or its power supply outside of the operating conditions
listed in this user guide.
To reduce the risks associated with hazardous voltage:
• Use only the power supply provided by 3M and specified for the country of use.
• Make sure that the WS Aware Workstation Monitor is properly grounded.
• Do not simultaneously power the WS Aware Workstation Monitor with the power supply and the RJ45 data
cable.
• Do not plug the WS Aware Workstation Monitor into your 10/100BaseT Ethernet factory network!
• Do not plug -3 versions into -5 interfaces and vice versa, this may cause irreversible damage to the WS
Aware Workstation Monitor and FMS.
• Do not use a longer screw to replace the supplied parts.
• Use only a dry cloth when cleaning.
WARNING
To reduce the risks associated with environmental contamination:
• Dispose of WS Aware Workstation Monitor and power supply in accordance with all applicable local and
government regulations
CAUTION
To reduce the risk of damage to components or assemblies being handled:
• WS Aware Workstation Monitor must be checked periodically to verify each test mode is functioning
correctly.
• Ensure proper operation of WS Aware Workstation Monitor by performing operational verification test as
required.
• Always properly ground your tools and dissipative mats to known good ground before connecting WS
Aware Workstation Monitor for monitoring.
NOTICE
