5
English
Bottom
A rectangular opening in the bottom allows clearance for the sensor that is mounted to the upper
face of the bottom plate. The bottom plate is held in place by two knurled thumbscrews. The
sample inlet fitting and tubing extends from the outer face of the bottom plate.
Right Side
These items are aligned toward the rear of the right side panel.
There are two battery compartment drawers near the top. They contain the two 9 volt alkaline
batteries, connected in parallel, which power the instrument.
Auxiliary Power Jack
A 2.5 mm pin jack is located near the bottom for operating the instrument from the AC adapter.
The AC adapter will power the instrument as long as power is supplied to it. The outer shell of
the jack is grounded to the case and is negative.
38-9018-0147-2_CarbMonMan 6/12/03 10:52 AM Page 5