
V-Series Air Control Valves - Maintenance
© 3M June 2006. All rights reserved.
i. Install the new special washer, laying it over the generator.
j. Thread the turbine cap clockwise onto the body assembly and
tighten with a wrench.
k. Install the new cold muffler onto the valve ball and hand tighten by
turning clockwise.
2) To replace the o-ring in the upper tube assembly:
a. Use a Phillips head screwdriver, remove the machine screw from
the body assembly.
b. Slide the body tube off of the 3M™ Vortemp™ Assembly.
c. Remove the o-ring with a small pliers.
d. Install the new o-ring using a small pliers if needed.
e. Slide the body tube back on to the heating tube.
f. Re-insert the machine screw into the body assembly.
3M™ Air Regulating Valve Assembly V-300
1.
The W-3036 is the Spare Parts Kit for the 3M™ Air Regulating Valve
Assembly V-300.
It can be used to replace the disc-muffler and screen
and to replace the o-rings on the control knob. To replace the disc-muffler
and screen:
a. Carefully remove the retainer with a small pliers.
b. Lift the muffler tube assembly away from the valve assembly.
c. Remove the retaining ring with a lock ring removal tool.
d. Turn the valve assembly over to remove the metal screen and foam
disks.
e. Insert the two new foam disks into the valve assembly.
f. Place the new metal screen on top of the foam disks.