3M™ MicroTouch™ Controller RX182 Reference Guide
25
3M Touch Systems, Inc. Proprietary Information
Tt
= Two ASCII characters that identify the controller type.
SC
Indicates the RX182 series of controllers
Ffff
= Four ASCII characters that indicate the features supported by the
controller.
R
Indicates a resistive controller
4
Indicates either 4 wire controller (RX142) or an 8 wire
controller
(RX182)
Indicates no additional features configured
Ss
= Two ASCII characters that provide status information about the
controller hardware. The two characters represent one byte. Each
character is in the range 0 to 9 and A to F.
Table 2 defines the meaning of each bit in the status byte. Each bit
can be set to 1 or 0, where
1
= an error and
0
= no error. So a
response of:
00
= No diagnostic errors (normal response)
The RX182 running with no errors returns the following string:
<SOH>
SCR4**00
<CR>
