4
78-8135-7466-8-B
4.0 Grommet Assembly Installation using the 3M
™
Scotchlok
™
4460-D/FO-CSM
For LBT
4.1
Please refer to instruction manual 78-0013-
2695-4 3M Scotchlok Shield Bond Connector
Assembly 4460-D/FO-CSM for LBT for installation
instructions.
4.2
Assembly is now ready to place in the end seal of
the closure or terminal. Refer to instruction manual
document number 78-8135-4502-3 for end seal
installation.
5.0 Grommet Assembly Installation using the 3M
™
Scotchlok
™
Shield Bond
Connector 4460-D/FO
5.1
Please refer to instruction 78-8128-0289-6 3M
Scotchlok Shield Bond Connector Assembly 4460-D/
FO and 4460-D/FO-SS for installation instructions.
6.0 Installation into Closure or Terminal
6.1
Assembly is now ready to place in the end seal of
the closure or terminal. Refer to instruction manual
number 78-8135-4502-3 for end seal installation.
6.2
Place cable and grommet assembly onto cable
addition bracket such that the retention tab slips
between the two cables as shown.
Note Place the grommet and cable assembly such that a
minimum of 0.78"(19.8 mm) of cable jacket extends past
the hose clamp.