Using the C5000
Signature Series
3M 2002
6
3. Press the HOLD key to place the second call on hold.
The display shows HOLD = 02 and SBY. Both calls are now
on hold.
4. Press the HOLD key again.
The display shows HOLD = 01 and LIS. The second call is
still on hold and the Station Selector is connected to the first
caller.
5. Press and release the TALK key to converse with the first
caller.
6. Press the STD BY key when finished.
The display shows HOLD = 01 and SBY and the Station
Selector beeps.
7. Press HOLD.
The display shows the second station number and LIS.
8. Press and release the TALK key to converse with the second
caller.
9. Press the STD BY key when finished.
Calling From Station Selector to
Call Station
There are three ways to call from the Station Selector to a Call
Station:
•
Select a specific Call Station.
•
Use directory assistance.
•
Use All Call Mode. See
All Call Mode
.
Select A Specific Call Station
System must be in Standby mode. To select a specific Call Station:
1. Press the key(s) associated with the Call Station being called
for the desired Call Station number (Call Stations 1 through 9
are entered as one digit).
Display shows the Call Station number and name.
2.
Proceed as described under Steps 2 through 4 under the
previous section
One Call Station Calling Station Selector.
Use Directory Assistance
Directory assistance allows searching for a Call Station by name.
The system must be in the Standby mode. To use directory
assistance:
1. From the Standby mode, press the MENU/0 key.
The display shows S = 01 and the station 1 name.
2. Do one of the following:
: HOLD=02
:SBY
_:Press ‘HOLD’
: HOLD=01
:LIS
S=12: PUMP # 12
: HOLD=01
:SBY
_:Press ‘HOLD’
:
:LIS
S=08: PUMP # 08
