Page 8 of 24
P/N 595278-01 Rev B 2/18
BASIC OPERATION OF THE PAK-TRACKER LOCATOR
SYSTEM
To turn on the Hand Held Receiver, press and hold both the ENTER and
the SCROLL buttons at the same time (see FIGURE 1). All lights will go on
briefly for a self test after which the LCD Display will show two dotted lines.
To turn on the
PAK-ALERT distress alarm equipped with the PAK-TRACKER
Locator System, open the air cylinder fully. Refe
r to the complete instructions
provided with the Scott Safety SCBA and the
PAK-ALERT distress alarm
.
If the respirator equipped with the
PAK-ALERT distress alarm
is motionless
for thirty (30) seconds, an alarm activates and transmits a signal with the
transmitter’s unique identification number.
When the Hand Held Receiver receives the signal from a transmitter, it sounds
an alarm. To track that ID number, make sure the ID number is on the top line of
the LCD Display and press the ENTER button
once
. The LCD Display shows
that you have entered the search mode.
If two or more transmitters are activated and transmitting, press and hold the
SCROLL button for three (3) seconds and continue to hold until the ID number
of the transmitter you want to track appears in the top line of the LCD Display.
Arrows appear at each side of the display to indicate that three or more transmit-
ters are activated and transmitting. Release the SCROLL button and then press
the ENTER button
once
to select the top ID number to track. See FIGURE1.
To change the ID number you want to track, press and hold the SCROLL
button for one (1) second and release to exit SEARCH mode. Press and hold
the SCROLL button for three (3) seconds until the new ID number you want to
track appears in the top row of the display. Release the SCROLL button and
press the ENTER button
once
to select the new ID number to track.
FIGURE 1
ENTER
BUTTON
SCROLL
BUTTON
LIGHTED
BARS
NUMBER
DISPLAY
LCD
DISPLAY
LOW
BATTERY
LIGHT
