FCC:
Supplier’s Declaration of Conformity for the following 3M Company manufactured product(s):
Trade Name: Scotch™ Thermal Laminator
Model(s): TL1306
We hereby declare that this product(s) complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Modifications to this device shall not be made without the written consent of 3M Company.
Unauthorized modifications may void the authority granted under Federal Communication Rules
permitting the operation of this device.
Responsible Party – US Contact information:
3M Company
3M Center, St.Paul, MN
55144-1000
Phone: 1-800-3M-HELPS
Internet contact information: www.scotchbrand.com
Body:
ABS plastic housing
Ready:
Turns green when ready for use
Input Tray:
The entrance for the object
to be laminated
Outlet:
The exit for laminated object
Pouch Reverse Button
On/Off Button:
Button glows green when
turned on
3 Mil Heat Setting
5 Mil Heat Setting
6 Mil Heat Setting
