5
Charging Case for the TEP-200 / LEP-200
1. Battery compartment (Fig. B:1)
2. Retention cord storage posts (Fig. B:2)
3. Test / Status button (Fig. B:3)
4. Earpiece charging receptacle (Fig. B:4)
5. Indicator light (Fig. B:5)
6. Micro B USB charging port (Fig. B:6)
7. Latch (Fig. B:7)
Charging Case for the EEP-100
1. Earpiece charging receptacle (Fig.C:1)
2. Indicator light (Fig. C:2)
3. Micro B USB charging port (Fig. C:3)
4. Latch (Fig. C:4)
Charging
The 3M™ PELTOR™ TEP-200, LEP-200
and EEP-100 Earplugs should be charged
before first use.
Note:
To maximize battery life, always
store earbuds in the case.
• For the
TEP-200 / LEP-200
, the earpieces
are charged inside the charging case
using 3AA batteries or Micro B USB
cord (not provided). Charging time is
approximately 90 minutes, regardless
of charging method.
• For the
EEP-100
, the earpieces are
charged using a Micro B USB cord
(provided). Charging time is
approximately 180 minutes.
Charging by Battery for the TEP-200 / LEP-200
1. To insert the 3 AA batteries into the battery compartment
(Fig.B:1), open the charging case by firmly lifting up on
the latch (Fig.B:7).
2. Gently open the battery compartment door inside the
charging case.
3. Insert the batteries while ensuring (+)(-) poles are aligned
according to the diagram on the charging case.
4. Close the battery compartment door.
5. Locate and line up the charging contacts on both the
earpiece (Fig.A:3) and charging receptacle inside the
case (Fig.B:4). Insert the narrow end of the earpiece
first (Fig.D:1), then gently rock and snap it into the
receptacle (Fig.D:2).
6. Repeat for second earpiece.
Fig. B
B:1
B:2
B:3
B:4
B:5
B:6
B:7
Fig. D:1
Fig. D:2
C:1
C:3
C:2
C:4
C:2
Fig. C
