background image

11

FCC and IC Information

This device complies with Part 15 of the FCC rules and Industry Canada’s Radio Standards 

Specifications. Operation is subject to the following two conditions: 

(1) This device may not cause harmful interference, and (2) this device must accept any 

interference received, including interference that may cause undesirable operation.

Note: 

This device has been tested and found to comply with the limits for a Class B digital 

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable 

protection against harmful interference in a residential installation. This device generates, uses 

and can radiate radio frequency energy and, if not installed and used in accordance with the 

instructions, may cause harmful interference to radio communications. However, there is no 

guarantee that interference will not occur in a particular installation. If this device does cause 

harmful interference, which can be determined by turning the device off and on, the user is 

encouraged to try to correct the interference by one or more of the following measures:

  •  Reorient or relocate the receiving antenna.

  •  Increase the separation distance between the two interfering devices.

  •  Consult 3M Technical Support.

     CAN ICES-3 (B)/NMB-3(B)

Reorder: Product and Accessories 

Replacement eartips are available from 3M. Navigate to 3M.com/PELTOR for additional     

ordering information. To reorder additional eartips, use 3M ID/product codes.

3M Stock Number

Product Number Description

70-0716-5628-7

TEP-200

3M™ PELTOR™ Tactical Earplug, TEP-200 Kit

70-0716-7700-2

LEP-200

3M™ PELTOR™ Level Dependent Earplug, 

LEP-200 Kit

70-0717-3079-3 

EEP-100

3M™ PELTOR™ Electronic Earplug, EEP-100 Kit 

70-0716-7379-5

TEP-CORD

3M™ PELTOR™ Tactical Earplug Retention Cord

70-0716-5025-6

TEP-200E

3M™ PELTOR™ Replacement Earpiece

70-0716-5026-4

TEP-200C

3M™ PELTOR™ Tactical Earplug Replacement Case

70-0716-7374-6

370-TEPL-25

3M™ PELTOR™  UltraFit™ Communication Tips           

Replacement, Large

70-0716-7373-8

370-TEPM-25

3M™ PELTOR™  UltraFit™ Communication Tips             

Replacement, Medium

70-0716-7372-0

370-TEPS-25

3M™ PELTOR™  UltraFit™ Communication Tips              

Replacement, Small

70-0716-1527-5

370-1019-10

3M™ PELTOR™  Skull Screw™ Communication    

Tips Replacement

70-0716-7521-2

CCC-GRM-25

3M™  PELTOR™  CCC-GRM-25  Communication  Tips                

Replacement

Summary of Contents for PELTOR Tactical Earplug TEP-200













Reviews: