11
9. Turn the guide on the right headband wire on the hardhat
attachment 90 degrees to unlocked position.
10. Remove the guide by pulling it straight out.
11. Turn the guide on the microphone holder 180 degrees.
12. Attach the microphone holder and guide to the headband
wire on the helmet attachment.
13. Turn the guide 90 degrees to locked position.
14. Turn the earcup without battery compartment according to
the illustration and attach the guides to the earcup.
Note:
The helmet attachment with the boom microphone
must be attached to the earcup without the battery
compartment.
Note:
The communication microphone guide is installed in
the opposite direction from the other guides.
Note:
Make sure the headband cable is placed inside the
headband wire.
EN
EN
Summary of Contents for Peltor ComTac VII MT14H41A-300NA
