4
7. TO FIT THE HEADSET
7.1. TO FIT THE HEADBAND
1. Put the earmuffs in position over your ears.
NOTE:
Make sure that the headband is in position across
the top of your head.
2. Hold the earcup and push the headband wire up or down.
7.2. TO FIT THE HELMET ATTACHMENT
1. Insert the lower lip (A) of the Accessory Rail Connectors
(ARC) connector attachment in the rail entry slot of
the ARC.
A
Note:
Make sure the ARC connector is positioned
according to the illustration.
2. Slide forward to lock into position. Ensure the
square loop (B) is up.
B
Caution:
The ARC connector should be positioned directly
above the ear to ensure correct positioning of the headset
earcup.
7.2.1. TO PUT THE HELMET ATTACHMENT INTO
TACTICAL MODE
• Push the earcup inwards until a click sound ensures
the earmuffs are locked into position.
Note:
Ensure the ear fits within the cushion.
7.2.2. TO PUT THE HELMET ATTACHMENT INTO
VENTILATION MODE
• Pull the earcups up and outwards until the earmuffs lock
into position, allowing a space between the cushion and
the ear.
Note:
The headset does not offer any hearing protection
when in ventilation mode.
Note:
To avoid damage to the earcup adjustment arm, do not
rotate the earcups placing them against the helmet.
EN
EN
Summary of Contents for Peltor ComTac VII MT14H41A-300NA
