3M Peltor ComTac VII MT14H41A-300NA User Manual Download Page 1

TM   

3M Personal Safety Division

3M Center St. Paul, MN 55144-1000

FOR MORE INFORMATION

In United States, contact:

Website: www.3M.com/PELTOR

Technical Assistance: 1-800-665-2942

[email protected]

In Canada, contact: 1-855-484-3093

[email protected]

For other 3M products: 1-800-3M-HELPS or 1-651-737-6501

FP3869REVB

Please recycle.

© 3M 2020. All rights reserved.

3M is a trademark of 3M Company, used under

license in Canada. PELTOR is a trademark of 3M Company,

used under license in Canada.

Patent: www.3M.com/patent

3M PSD products are for occupational use only.

PARA OBTENER MÁS INFORMACIÓN en los Estados

Unidos:

Internet: www.3M.com/PELTOR

Información técnica: 1-800-665-2942

© 3M 2020. Todos los derechos reservados. 3M es

una marca registrada de la Compañía 3M, utilizadas bajo

licencia en Canadá. PELTOR es una marca registrada de la 

Compañía 3M, utilizada bajo licencia en Canadá.

Los productos de la División de Protección Personal (PSD, por

su sigla en inglés) de 3M son solo para uso profesional.

3M Personal Safety Division

3M Canada Company

P.O. Box 5757, London, Ontario N6A 4T1

Division de la protection individuelle - 3M Company

Canada

3M Canada, C.P. 5757 London

(Ontario) N6A 4T1

FOR MORE INFORMATION/POUR OBTENIR DE PLUS

AMPLES RENSEIGNEMENTS

In Canada, contact/Au Canada, communiquer avec :

Internet : www.3M.ca/safety

Technical Assistance/Assistance technique : 1 800 267-4414

Centre d’aide à la clientèle/Customer Care Center : 1 800

364-3577

© 3M 2020. Tous droits réservés.

3M est une marque de commerce de 3M

Company utilisées sous licence au Canada. PELTOR est

une marque de commerce de 3M Company, utilisée sous

licence au Canada.

Les produits de la DPI de 3M sont destinés à une utilisation

professionnelle seulement.

Summary of Contents for Peltor ComTac VII MT14H41A-300NA





















Reviews: