3M Multimedia Projector X62w, Network Function Manual

Page: 73 / 84

73
Schedule Settings
(
32
)
Schedule settings can be con fi gured from a web browser.
Example: If the IP address of the projector is set to 192.168.1.10:
There are three types of scheduling.
1) Daily: Perform the speci
fi ed operation at a speci fi ed time every day.
2) Sunday ~ Saturday: Perform the speci fi ed operation at the speci fi ed time on a
speci fi ed day of the week.
3) Speci fi c Date: Perform the speci fi ed operation on the speci fi ed date and time.
• In Standby mode the power indicator will fl ash green for approx. 3
seconds when at least 1 “Power ON” schedule is saved.
• When the schedule function is used, the power cord must be connected to
the projector and the outlet and the power switch must be turned on, [ | ]. The
schedule function does not work when the power switch is turned off, [
] or
the breaker in a room is tripped. The power indicator will lights orange or green
when the projector gets is receiving the power.
NOTE
1) Enter
[http://192.168.1.10/ ]
into the address bar of the web browser.
2) Enter the Administrator ID and Password and click
[Logon]
.
3) Click
[Schedule Settings]
on the main menu and select the required schedule
item. For example, if you want to perform the command every Sunday, please
select the
[Sunday]
.
4) Click the
[Enable]
check box to enable scheduling.
5) Enter the Date (Month/Day) for speci fi c date scheduling.
6) Click
[Add]
and set the time, command and parameters and click
[Add This
Schedule]
when you want to add a command.
7) Click the
[Delete]
button when you want to delete a schedule.
8) Click the
[Apply]
button to save the settings.
4. Utilize projector – Advanced -