3M Multimedia Projector X62w, Network Function Manual

Page: 35 / 84

35
2. Equipment connection and network setting
2.5.7 Date/Time Settings (Continued)
Click the
[Apply]
button to save the settings.
Item Description
Daylight Savings Time
Click the
[ON]
check box to enable daylight savings time and
set the following items.
SNTP Server IP Address
Con fi gures the SNTP server address in IP format.
Cycle
Con fi gures the interval at which to retrieve Date and Time
information from the SNTP server. (hours:minutes).
Start
Con fi gures the date and time daylight savings time begins.
Month
Con fi gures the month daylight savings time begins (1~12).
Week
Con fi gures the week of the month daylight savings time
begins (First, 2, 3, 4, Last).
Day
Con fi gures the day of the week daylight savings time begins
(Sun, Mon, Tue, Wed, Thu, Fri, Sat).
Hour
Con fi gures the hour daylight savings time begins (0 ~ 23).
Minute
Con fi gures the minute daylight savings time begins (0 ~ 59).
End
Con fi gures the date and time daylight savings time ends.
Month
Con fi gures the month daylight savings time ends (1 ~ 12).
Week
Con fi gures the week of the month daylight savings time ends
(First, 2, 3, 4, Last).
Day
Con fi gures the day of the week daylight savings time ends
(Sun, Mon, Tue, Wed, Thu, Fri, Sat).
Hour
Con fi gures the hour daylight savings time ends (0 ~ 23).
Minute
Con fi gures the minute daylight savings time ends (0 ~ 59).
Time difference
Con fi gures the time difference (hours:minutes).
Set the same time difference as the one set on your PC. If
unsure, consult your network administrator.
SNTP
Click the
[ON]
check box to retrieve Date and Time
information from the SNTP server and set the following items.
• The new con fi guration settings are activated after restarting the network connection.
The network connection must be restarted when the con fi guration settings are changed, The
network connection can be restarted using
[Network Restart]
on the main menu.
• If you connect the projector to an existing network, consult a network administrator before setting server addresses.
• To enable the SNTP function, the time difference must be set.
• The projector will retrieve DATE and TIME information from the timeserver
and override time settings when SNTP is enabled.
• The Internal Clock’s time may not remain accurate. Using SNTP is recommended to maintain accurate time.
NOTE
2.5 Confi guring and controlling the projector via a web browser (Continued)