3M™ Multimedia Projector X62 Product Safety Guide
© 3M 2006
10
Lamp
Lamp Operation:
The following symptoms may indicate a lamp in need of replacement:
• LAMP indicator lights up red.
•
To reduce the risk associated with environmental contamination due to
mercury in the projection lamp:
-
Dispose of lamp cartridge in accordance with applicable federal, state and local regulations.
-
The lamp in this product contains mercuy. Dispose of projection lamp in a manner
that is consistent with your local hazardous waste regulations for mercury.
-
For recycling and disposal information, contact your respective governmental
agencies.
In U.S., contact the Electronic Industries Alliance at www.lamprecycle.org
In Canada, contact 1-800-362-3577 (3M Canada)
WARNING
Display Lamp Operation Hours
To determine the lamp operation hours, follow these steps:
1. While the projector is running, press the MENU button on the remote control.
Choose the “OPTION” using the
ź
button, and press the
Ź
button or the ENTER button.
Choose the “LAMP TIME” using the
ź
button.
2. The operating time of the lamp will be displayed.
The lamp time is the time counted after the last resetting.
¥
Note
Please reset the lamp time only when you have replaced the lamp, for a suitable
indication about the lamp.
Reset Lamp Hours
(1) Press the MENU button to display a menu. Only when the EASY MENU has appeared,
please perform the next step (2).
3RLQWDWWKH³*R7R$GYDQFH0HQX«´LQWKHPHQXXVLQJźŸEXWWRQWKHQSUHVVWKH
ŹEXWWRQ
3RLQWDWWKH³237,21´LQWKHOHIWFROXPQRIWKHPHQXXVLQJźŸEXWWRQWKHQSUHVV
WKHŹEXWWRQ
3RLQWDWWKH´/$037,0(´XVLQJźŸEXWWRQWKHQSUHVVWKHŹEXWWRQ$GLDORJZLOO
appear.
3UHVVWKHŸEXWWRQWRVHOHFW³5(6(7´RQWKHGLDORJ,WSHUIRUPVUHVHWWLQJWKHODPS
time.
3M™ Digital Projector X62
