3M Multimedia Projector S55i Operator'S Manual Download

Page: 47 / 54

Troubleshooting

Regarding the indicator lamps (continued)

POWER

indicator

LAMP

indicator

TEMP

indicator

Description

Blinking

Red

Lighting

Red

Turned

off

Blinking

Red

The cooling fan is not operating.

Please turn the power off, and allow the projector to

cool down at least 20 minutes. After the projector has

sufﬁciently cooled down, please make conﬁrmation

that no foreign matter has become caught in the fan,

etc., and then turn the power on again.

If the same indication is displayed after the remedy,

please contact your dealer or service company.

Blinking

Red

Lighting

Red

Turned

off

Lighting

Red

There is a possibility that the interior portion

has become heated.

Please turn the power off, and allow the projector to

cool down at least 20 minutes. After the projector has

sufﬁciently cooled down, please make conﬁrmation of

the following items, and then turn the power on again.

• Is there blockage of the air passage aperture?

• Is the air ﬁlter dirty?

• Does the peripheral temperature exceed 35°C?

If the same indication is displayed after the remedy,

please set FAN SPEED of the SERVICE item in the

OPTION menu to HIGH.

Lighting

Green

Simultaneous

blinking in

Red

It is time to clean the air ﬁlter.

Please immediately turn the power off, and clean or

change the air ﬁlter referring to the section “Air Filter”.

After cleaning or changing the air ﬁlter, please be sure

to reset the ﬁlter timer. After the remedy, reset the

power to ON.

NOTE

• When the interior portion has become overheated, for safety

purposes, the power source is automatically turned off, and the indicator lamps

may also be turned off. In such a case, press the “



” (OFF) side of the power

switch, and wait at least 45 minutes. After the projector has sufﬁciently cooled

down, please make conﬁrmation of the attachment state of the lamp and lamp

door, and then turn the power on again.

3M™

Digital

Projector S

55i/X55i

Summary of Contents for Multimedia Projector S55i






















































Search results

Summary of Contents for Multimedia Projector S55i

Reviews:

Related manuals for Multimedia Projector S55i

Brands by name

Popular brands

3M Multimedia Projector S55i, Operator'S Manual

Search results

Summary of Contents for Multimedia Projector S55i

Reviews:

Related manuals for Multimedia Projector S55i

Brands by name

Popular brands