3M
Multimedia Projector MP8610
Disassembly/Reassembly
3M 1999
2-12
3
6
5
1
2
4
7
2-3-9.
Remove IR Receiver Board
To avoid electrical shocks, unplug projector
power cord before performing any maintenance
to electrical components.
To avoid burns to fingers, allow projector lamp
and internal projector components to cool off prior
to lamp removal or disassembly.
Remove the lens cover and top cover.
1.
Place a protective cover over the lens.
2.
Disconnect two (2) speaker wires.
3.
Loosen the nut and thread the setscrew out.
4.
Slide the speaker up and remove. [a magnet is holding
the speaker to the bracket].
√√
Note
When reinstalling the speaker, there are two (2) screws
on the side of the bracket for speaker alignment.
5.
Disconnect the cable to the IR receiver board.
6.
Remove one (1) screw.
7.
Remove the IR receiver board.
8.
Reassemble in reverse order.
!
Caution
!
WARNING
