Downloaded from Projector.com
3M 1998
3M
Multimedia Projector MP8610
9
4-5. Menu Adjustments/Settings
Depending on the current video source selection, the menu items for either the Video Menu or the Data
Menu will display. The table below lists all the menu items that can be adjusted.
An asterisk (*) indicates the item appears on the Data menu only, two asterisks (**) indicate the item
appears on the Video/S-VHS menu only and no marking ( ) indicates the item is common to both menus.
Submenu
Menu Item
Explanation of Adjustment/Setting
Setup*/Picture**
<Mode>*
Selection of graphic mode (e.g. VGA 640 x 480, VESA 800 x
600 72 Hz, etc.). Five user modes. See Appendix C-2.
Brightness
Image brightness.
Contrast
Image contrast.
V. off.* (vertical offset)
Adjusts the vertical position of the image.
H. off.* (horizontal offset) Adjusts the horizontal position of the image.
Color**
Color saturation.
Inverse*
Inverse image displayed.
(Default=off)
Sync*
Manual synchronization (phase) or automatic adjustment
using Enter.
Tracking*
Manual screen width (total pixel number/line) or automatic
adjustment using Enter.
Pix.*
Image format. (For unscaled image use 800 x 600)
Option
Projection
Change image direction for rear, ceiling mount, rear ceiling
mount and normal projection.
(Default=std.)
Lamp Mode
Select lamp power: eco. (low), std. (high) (
Default = eco.)
Remote
Turn remote control feature On/Off.
(Default=On)
Auto Mode*
Turn automatic mode detection On/Off.
(Default=On)
Language
Select menu display language.
(Default=English)
Help
Turn menu help text messages On/Off.
(Default = On)
Std.**
Selection of video standard (Default = Auto)
Lamp*
Lamp life indicator. Green bar - lamp is good. Red bar -
lamp needs replacement.
Sog*
Sync-On-Green level. Only for Sync-On-Green mode.
Deinterlacing**
On = standard video input (VCR)
Off = motion video input (camera)
Reset
Restores video modes to factory default settings.
<Sync Mode>*
Change synchronization mode (separate, composite, Sog).
Hue**
Color level for NTSC video.
NTSC**
Default setting of NTSC image (scaled or unscaled)
Audio
Volume
Volume level.
Treble
Treble setting.
Bass
Bass setting.
Balance
Left/right balance of speakers.
Audio
Speakers On/Off.
(Default = On)
Stereo
Stereo sound On/Off.
(Default = On)
<Audio assignment>
Select audio-in channels (Audio-1/Audio-2) to speakers
according to video selection.
Audio-In 1: Data S-VHS S-VHS
Audio-In 2: Video Data Video
(Default=Data/Video)
<Video Mode>
Select video source: Data, Video or S-VHS
