8
3M™ Multi-Touch Chassis Display User Guide
3M Touch Systems, Inc. Proprietary Information – TSD-45335
CAUTION
To avoid the risk of muscle strain, which may result in minor or moderate injury:
•
Always use two people when lifting or installing display, as the display weighs over
26 kgs (57 lbs).
To avoid the risk of muscle strain , which may result in minor or moderate injury:
•
Do not install the display in an awkward accessibility orientation.
•
The user should take frequent breaks to prevent from muscle strain injury
To avoid the potentially hazardous situations associated with the use of alcohol or
other solvents used for cleaning the touch screen which may result in minor or
moderate injury or property damage:
•
Follow all instructions and recommendations in the manufacturer's Material Safety
Data Sheet and product label.
•
Be sure to follow solvent manufacturer's precautions and directions for use when
using any solvents
•
It is important to avoid using any caustic chemicals on the touch sensor.
To avoid possible environmental contamination which may result in minor or
moderate injury:
•
Dispose of the flat panel display according to applicable governmental regulations
.
NOTICE
To avoid the risk of potential damage to the display electronics:
•
Always use the VESA 400 mm mounting holes when using an arm attachment. Do
not drill additional holes in the unit to mount plates other locations
•
Do not use longer screws as they could potentially damage electronics inside the
display.
•
Be sure to gasket the display to its enclosure properly to prevent damage to the
touch sensor. Refer to the 3M Multi-Touch PCT2000PX System Integration Guide
(TSD-39954) for more information.
•
Do not place hot or cold beverages or liquids on the screen display surface.
Important Notes
•
In extreme temperature and humidity situations, you may observe condensation
between the sensor and the display. To minimize this condition, place the unit where
it will be used and allow a 24-hour environmental stabilization period prior to
powering on the display. Any noticeable condensation is temporary and will have no
long term affect on the operation of the display.
•
You are cautioned that any change or modification to the equipment not expressly
approved by the party responsible for compliance could void your warranty.
•
When unplugging the power supply cord, hold the plug, do not pull by the cord.
•
Do not connect or disconnect this product during a thunder storm or lightning.
Summary of Contents for Multi-Touch C4267PW
Page 32: ......
