3M™ Multi-Touch Chassis Display User Guide
15
3M Touch Systems, Inc. Proprietary Information – TSD-45335
2.
Make sure the video image is displayed. If it is not, check the LED to ensure that the
display is not in power save mode (amber)
3.
Make sure the video image is centered within the screen area. Use the display
controls to adjust the image, if necessary.
You can adjust the horizontal and vertical position, contrast, and brightness to better suit
your video card and your personal preference. For additional details, refer to the
Adjusting the Video Display later in this chapter.
Mounting the Multi-Touch Chassis Display
The C4267PW Multi-Touch Chassis Display is designed to fit any type of enclosure. All
3M Touch Systems chassis displays are encased in rugged metal instead of plastic,
making them easy to integrate.
CAUTION
To avoid the risk of glass breakage which may result in minor or moderate injury:
•
To avoid risk of injury when handling the display be aware that the sensor edges
may be sharp.
CAUTION
To avoid the risk of glass breakage and impact injury, which may result in minor
or moderate injury and/or property damage
•
Read, follow and understand the mounting instructions and hardware provided.
Product weight is 26.6 kg (57lbs.)
•
Use appropriate lift surface to support the display on installation or two people are
required for safe installation.
•
Other mounting styles or installation methods are not recommended due to the high
level of technician skill and training required for successful load bearing mounts
and due to variations in mounting surfaces, dependence on ratings of mounting
arms and appropriateness of ancillary hardware. Should user elect to disregard this
recommendation, user must ensure the installation is performed by an experienced
technician who is trained in proper load bearing mounting procedures, and user is
solely responsible for ensuring the mounting equipment used is appropriate for use
with the product.
The C4267PW Multi-Touch Chassis Display includes a hardware accessory kit for
mounting the unit into an enclosure. The hardware accessory kit includes 4 mounting
brackets and (12) 8-32 screws. The mounting holes are located on all 4 sides of the
display. Always use the supplied screws.
Note:
Always use the mounting holes when attaching to the brackets. Do not drill
additional holes in the unit to mount brackets to other locations.
Summary of Contents for Multi-Touch C4267PW
Page 32: ......