3M
Multimedia Projector MP8670/8745/8755/8770
Adjustments
Copyright
2000, 3M IPC. All Rights Reserved.
1-10
2
Alignment
1-7-5.
SUB POSITION Adjustment
Adjustment Preparation:
1.
Make this adjustment after completing S/H Timing
Adjustment.
2.
Use a SVGA (MP8670) or XGA (MP8745), VESA
(60) timing signal to input a 0.7V p-p cross hatch
signal.
3.
Press the AUTO button on the Remote Controller.
Adjustment Procedure
1.
Use the SVGA (MP8670 or XGA (MP8745) VESA
(60) timing signal to input a 0.70V p-p frame signal.
2.
Use
S/H - SUB H POSI.
Adjust so that the left and
right frames are displayed.
√√
Note
The frame is displayed in three steps at this stage. Adjust
only the center step. Colors may appear in vertical stripes
in some cased.
