International - ENG
February 2021
3M-Matic
™
8000a-I / 8000a3-I - Type 11700
Page 19
44-0009-2161-7 / ECO# 0078483
Figure 7-5
Figure 7-6
Figure 7-4
7. Installation
(continued)
7.5 Removal of Plastic TIes
Cut the plastic which attaches the
top head to the frame and remove
the polystyrene blocks
(Figure 7-4).
Cut the plastic strap which
attaches the strip and the
EMERGENCY STOP cable to the
frame
(Figure 7-5).
Cut the plastic
ties holding the lower taping head
in position
(Figure 7-6).
7.6 Assembly Completion
1. Handle - Remove handle from
shipping position and reinstall
in operational position -
(Figure 7-7A).
2. Tape Drum Bracket - Install upper
tape drum bracket on top cross
bar as shown
(Figure 7-7B).
Figure 7-7
B
C
A
