International - ENG
February 2021
3M-Matic
™
8000a-I / 8000a3-I - Type 11700
Page 2
44-0009-2161-7 / ECO# 0078483
1. Introduction
(continued)
1.2 How to Read and Use the Instruction Manual
This instruction manual covers safety aspects, handling and transport, storage,
unpacking, preparation, installation, operation, set-up and adjustments, technical and
manufacturing specifications, maintenance, troubleshooting, repair work and servicing,
electric diagrams, warranty information, disposal (ELV), a definition of symbols, plus a
parts list of the 3M-Matic
™
8000a-I / 8000a3-I
Adjustable Case Sealer.
3M Closure and Masking System Division
3M Center, Bldg.
St. Paul, MN 55144-1000 (USA)
Edition 2021 © 3M 2021. All rights reserved.
The manufacturer reserves the right to change the product at any time without notice.
Publication © 3M 2021
/
44-0009-2161-7.
1.2.1 Importance of the Manual
The manual is an important part of the machine; all information contained herein is
intended to enable the equipment to be maintained in perfect condition and operated
safely. Ensure that the manual is available to all operators of this equipment and is kept
up to date with all subsequent amendments. Should the equipment be sold or disposed
of, please ensure that the manual is passed on. Electrical and pneumatic diagrams are
included in the manual. Equipment using PLC controls and/or electronic components
will include relevant schematics or programs in the enclosure and in addition, the
relevant documentation will be delivered separately.
1.2.2 Manual Maintenance
Keep the manual in a clean and dry place near the machine. Do not remove, tear, or
rewrite parts of the manual for any reason. Use the manual without damaging it. In
case the manual has been lost or damaged, ask your after sale service for a new copy.
1.2.3 Consulting the Manual
The manual is composed of:
- Pages which identify the document and the machine
- Index of the subjects
- Instructions and notes on the machine
- Enclosures, drawings and diagrams
- Spare parts (last section)
All pages and diagrams are numbered. The spare parts lists are identified by
the figure identification number. All the notes on safety measures or possible
dangers are identified by the symbol:
1.2.4 How to Update the Manual in Case of Modifications to the Machine
Modifications to the machine are subject to manufacturer’s internal procedures.
The user receives a complete and up-to-date copy of the manual together with
the machine. Afterwards the user may receive pages or parts of the manual
which contain amendments or improvements made after its first publication.
The user must use them to update this manual.
